How to Make a Paper Rope
Posted By: teresaschultz; Category: Games & Recreation; May 30, 2009
Author Teresa Schultz;
Very few people are aware of the strength of a rope made from paper. To prove it to yourself, get 3 rolls of toilet paper. Single or double ply, they both work. For soft hands, use double ply.
1
Find a pole.
2
Unravel one roll of toilet paper, and run it around the pole. You want two equal lengths of toilet paper, folded around the pole.
3
Let it rest on the ground, and do the same with the other two rolls.
4
When all three rolls are unwound and passed around the pole, go to the pole.
5
Pick up the six lengths, close to the pole, and pull lightly, to get equal tension on all the lengths.
6
Walk backwards, to the loose ends, running the paper through your hands as you walk, maintaining the light tension.
7
When you get to the end of the six lengths, start twisting the lengths over and over again.
8
Keep a light tension. As you wind, the “rope” will become shorter. This is normal.
9
The tighter you can wind it, the stronger it gets.
10
Pretty soon you will be able to lean over backwards while hanging on the rope.
11
When the “rope” is quite tightly wound, cut off the end where it passes around the pole.
12
Tie one end of your rope to your little brothers’ bicycle.
13
Tie the other end to Mom’s car.
Only registered users can add comments